The installation process for automotive rim protectors varies depending on the model you have purchased.

Below are the steps for each type:

Alloy rim protector: Start by thoroughly cleaning the wheel rim to remove any dirt or grease. Peel off the adhesive backing from the 3M glue provided with your alloy model rim protector. Carefully align the protector with the rim and press it firmly into place around the entire rim.

One-Piece Rim Protector:

1) Clean scratches on wheels

2) Paste cushioning cotton on the hub protective cover

3) According to the three-point positioning method of the triangle.

First press and fix the valve part, then two spaces each, and press and fix the fourth space. Accordingly, fix the third grid fixed point. After the three points are fixed, press the remaining buckle positions in sequence.

Split Rim Protector: Insert the hub protector into the wheel hub, then press the edges inward to secure. Align the next hub protector segment with the edge of the previous one and press it in. Repeat this step for all segments.For all models, make sure the rim's surface is dry and at room temperature for optimal adhesion. Check the alignment and press down firmly to ensure the protector is securely attached.

While most of our Teslaunch wheel rim protectors are designed to adapt to a broad array of wheel sizes and types, compatibility can vary depending on the model:

Alloy rim protector: This model is highly adaptable and is suitable for almost all wheel sizes and models, as long as the wheel hub size is correct and there are no protrusions on the edge of the wheel hub.

One-Piece rim protector: Specifically designed for select Tesla models, this protector fits only the following wheels:
Tesla Model Y 20'' Induction Wheel
Tesla Model Y 21'' Uberturbine Wheel
Tesla Model 3 Performance 20'' Uberturbine Wheel

Spilt rim protector: Specifically designed for Tesla Model Y 21'' Uberturbine Wheel

Wheel rim protectors from Teslaunch typically last around 1~2 years under normal driving conditions. The exact duration can vary based on factors such as the frequency of curb contact and exposure to harsh environmental conditions. For detailed information on care and maintenance to maximize the lifespan of the product, refer to the specific guidelines provided with the purchase.

예,Teslaunch림 프로텍터는쉬운 제거그리고 의지바퀴가 손상되지 않음. 림 프로텍터를 제거하거나 교체해야하는 경우 휠 표면을 손상시키지 않고 직접 수행 할 수 있습니다.

예,Teslaunch, 우리는 차량의 색 구성표를 일치시키거나 보완하기 위해 다양한 색상의 림 프로텍터를 제공합니다. 가장 적합한 선택을 돕기 위해TeslaModel, 우리는 원래 자동차 휠 색상을 기반으로 특정 색상을 추천:
를 위해TeslaModelY 20 '유도 바퀴:매트 블랙원래 휠 색상과 일치하는 것이 좋습니다.
를 위해TeslaModelY 21 "Uber터빈 바퀴과TeslaModel3 성능 20 인치 Uber터빈 바퀴:카본 그레이일치하는 것이 좋습니다원래 색상바퀴의.

If your Teslaunch rim protector starts peeling or coming off, it's important to address the issue promptly to prevent further damage. First, clean the affected area thoroughly to remove any dirt or debris. Reapply the protector using a suitable adhesive, ensuring that the surface is dry and free from contaminants before application. If the protector continues to peel or if significant damage is evident, it may be necessary to replace it entirely to ensure continued protection and optimal appearance. Please contact our after-sales service for specific questions and further assistance.

Teslaunch rim protectors are specifically designed to offer substantial protection against curb damage, effectively safeguarding your rims from scratches and minor impacts. Their effectiveness has been validated through extensive real-world use by thousands of miles and tens of thousands of Tesla owners. For the best results, ensure that your rim protectors are properly installed and intact.